Clunking over bumps? Loose steering? E1 Auto Care provides professional ball joint replacement in Arlington, TX. We diagnose accurately and use quality parts—backed by our 12 months / 12,000 miles warranty on parts and labor.
Ball joints are pivot points that connect your control arms to your steering knuckles. They allow the suspension to move up and down while the wheels pivot left and right for steering. Think of them like your shoulder joint—flexible but strong.
Most vehicles have upper and lower ball joints. They're sealed and lubricated from the factory, but eventually the grease wears out and the joint develops play. This causes clunking noises, steering wander, and uneven tire wear.
At E1 Auto Care, we check ball joints by measuring play with dial indicators—not just wiggling them. Worn ball joints can fail suddenly, potentially causing loss of control. We take this seriously and use quality replacement joints that last.
What Customers Say About Our Suspension Work
Rated 5 out of 5 stars.
“They go above and beyond to find solutions to your problem. I would highly recommend them. Best in the business”
Yves K.Google review
Rated 5 out of 5 stars.
“What I thought was wrong and what was wrong were two different things they were honest great customer service.”
Nicole R.Google review
Signs of Worn Ball Joints
Clunking or popping noise when going over bumps
Steering feels loose or wanders
Uneven tire wear, especially on the inner or outer edge
Vehicle pulls to one side
Steering wheel vibration
Squeaking noise when turning or going over bumps
Visible play or movement in ball joint when inspected
Torn or missing ball joint boot
Our Ball Joint Replacement Process
1Lift vehicle and secure on jack stands
2Check ball joint play with pry bar and dial indicator
3Compare play measurements to manufacturer specifications
4Inspect ball joint boots for tears or missing grease
Shop tipBall joints often wear in pairs. If one lower ball joint is worn, the other is likely close behind. We'll inspect both sides and give you honest recommendations about what truly needs replacement.
6Remove wheel, brake caliper, and separate ball joint from knuckle
7Press out old ball joint and press in new joint (or replace control arm)
8Reassemble and torque all fasteners to specification
9Perform wheel alignment (required after ball joint replacement)
10Test drive to verify no noise and proper handling
Backed for 12 months or 12,000 miles.
Repairs and services we do with parts we supply are covered for 12 months or 12,000 miles, whichever comes first, on parts and labor. Oil changes, inspections and other basic upkeep aren't covered. If something we fixed isn't right, bring it back.
Choose a coupon, we email you the code, and you show it to us any time before you pay.
New location offer
10% off parts10%offparts
For new and returning customers at our new Arlington shop.
Takes up to $100 off parts on one repair order.
Mention it when you call or any time before you pay.
1 of 1
Why Choose E1 Auto Care for Ball Joint Service
Experienced techniciansYears of hands-on work with all makes and models, domestic and European.
12 months / 12,000 milesRepairs done with our parts are covered on parts and labor, whichever limit comes first.
You see it firstPhotos and videos of what we find, by text or email, before any work starts.
Honest, written estimatesA clear number before we begin, and we tell you what can wait.
Ball Joint Replacement FAQ
How Much Does Ball Joint Replacement Cost in Arlington, TX?
Ball joint replacement cost depends on your vehicle's design. Some have serviceable press-in ball joints; others require complete control arm replacement (more expensive). We measure ball joint play precisely and only recommend replacement when truly needed. Price includes alignment, which is required after ball joint work.
